
Machinery is at the heart of many workplaces, from manufacturing facilities and warehouses to processing plants and recycling operations. Yet one of the most common causes of serious workplace injuries continues to be contact with dangerous moving parts.
A recent prosecution by the Health and Safety Executive (HSE) demonstrates how unsafe practices can become normalised over time, leading to devastating consequences for employees.
In March 2025, maintenance engineer Daniel Slinger was working a night shift at Factory Services UK Limited, an animal-feed manufacturer based in Merseyside, when he was asked to investigate an issue with a conveyor system.
While the conveyor remained operational, Mr Slinger reached through a hole that had been cut into the side of the conveyor casing to clear a blockage. His arm was immediately pulled into the moving machinery. There was no guard protecting the opening and no emergency stop button located nearby.
Working alone at the time, there was nobody nearby to witness the incident. In a desperate attempt to seek assistance, Mr Slinger repeatedly waved at a CCTV camera in the hope that someone monitoring the system would notice him. Nobody responded. After approximately 40 seconds, he managed to free his arm himself.
The injuries were catastrophic and life changing. Mr Slinger suffered:
At the time of the HSE’s prosecution, he remained unable to return to work.
The HSE’s investigation uncovered a number of serious failings.
The hole in the conveyor casing had reportedly been cut into the machinery years earlier to allow workers to clear blockages while the conveyor remained running. Investigators also discovered a second conveyor on site with a similar unauthorised access point. Despite routine inspections, audits, and management walkarounds, these dangerous modifications had not been identified or rectified.
Perhaps most concerning was that the company’s own safe systems of work required machinery to be guarded and isolated before maintenance or cleaning activities took place. However, these controls were not being followed or effectively enforced.
As a result, Factory Services UK Limited pleaded guilty to breaching health and safety legislation and was fined £160,000, in addition to costs.
Take a moment to consider:
If you are unsure, it may be time to review your arrangements.
This case is a powerful reminder that risk assessments and procedures alone are not enough. Organisations must regularly verify that controls are being followed in practice and that machinery remains safe throughout its life cycle.
Kingfisher Professional Services can support your organisation with machinery safety audits, PUWER inspections, lock-off and isolation reviews, workplace inspections, risk assessment training and support, and health and safety compliance audits.
A proactive review can help identify weaknesses before they result in serious injury, enforcement action, or costly disruption.